Updates and Results
Talks and Posters
Advice
Ideas
Important Figures
Write-Ups
Outreach
How-To
Funding Opportunities
GENETIS
GENETIS
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Wed Aug 2 00:17:32 2023
Author
*
:
Subject
*
:
<p>I've been building in XF and have ran into some issues but currently have the following completed:</p> <p>- Struts are placed, though they are not evenly spaced and the same. I have contacted XF to try and figure out how to get rotation/patterns to do what we need</p> <p>- Circuit components and circuit board are in the xf file, though the components are not on the circuit board (I'm not totally sure how to put them on, that's the next step). The circuit components should be of spec, I looked up the part numbers from the previous ELOG post and grabbed the values from the manufacturer.</p> <p> </p> <p>Here are the things that have not been completed/need answered:</p> <p>- How to evenly space the struts connecting the shape (as stated previously, I've contacted XF to figure out how to do this easily. Im just bad at modeling in XF)</p> <p>- Add circuit components to circuit board</p> <p>- Add voltage and ground connections to the circuit board</p> <p>- On the circuit diagram, figure out J1 and J2 connections. Meaning, which one connects to the signal from the cable and which connects to the other cone that is used as ground?</p> <p> </p> <p>To see current antenna build go to: " /users/PAS1977/jacobweiler/GENETIS/XFzone/straightened_antenna_for_Jack.xf "</p> <p>Attached are pictures in case there are issues pulling up model in XF. :)</p> <p> </p> <p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
sidepic.PNG
Attachment 2:
circuitboardplacement.PNG
Attachment 3:
fullpic.PNG
Attachment 4:
struts.PNG
Attachment 5:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.5-fc6679b