| Name |
Today's Update |
Plans for Tomorrow |
| Alex M |
Worked with Alex P to look at the different gain patterns for antennas with different separation distances. We found that there wasn't a clear frequency where they started to agree--looking at the average frequency gain plots we sent on slack, they look very different. We're trying to resimulate them with some higher frequencies to see the pattern more clearly and find where they start to agree. |
I should be able to finish making those frequency plots in the morning. I think I'm going to try spending some time with Karoo tomorrow and see what Julie's been able to figure out. |
| Alex P |
Looking at differences between small antennas and how the spacing affected their gains to see where differences occurred and saw at 350 MHz is last one where bigger spacing is better and after that it seems like the smaller spacing is better at 366.7 MHz and above. We checked and it actually flips back and forth between which is better and couldn't find a real pattern there. Switched to make an average gain plot for each frequency to see a pattern in the average gain since the 3D graphs use color and sometimes it can be hard to tell by how much the differences are. |
Continue to work with the spacing to find which frequencies cause problems for antennas according to their sizes. |
| Eliot |
Implemented the option of an asymmetric radius within the GA. Now, our new gene (separation) is the only gene without the possible asymmetry. This is because an asymmetric separation wouldn't do anything as the separation in XF(ie its offset from the origin) does not constitue a physical significance in AraSim. |
Leo and I will begin to implement the separation gene throughout the remainder of the loop. |
| Leo |
|
|
| Ryan |
Continued working on the roulette function for paperclips1.0.1.cpp. Ran into some issues with returning an array. |
Debug the roulette function, maybe test if I get everything working and sent to the correct places. |
| Evelyn |
|
|
| Ben |
|
|
| Ethan |
|
|